Refrigerator Use; Ensuring Proper Air Circulation; Using The Controls - Sears Kenmore Elite 106.5177 Serie Manual De Uso Y Cuidado

REFRIGERATOR USE

Ensuring Proper Air Circulation

Single Evaporator (on some models)
In order to ensure proper temperatures, you need to permit air to flow
between the two sections. Cold air enters the bottom of the freezer section
and moves up. It then enters the refrigerator section through the top vent.
(On Style 2 models, this air is also evenly distributed throughout the
refrigerator compartment through six vents on the back wall.) Air then
returns to the freezer as shown.
Style 1
Do not block any of these vents with food such as soda, cereal, bread, etc.
If the vents are blocked, airflow will be obstructed and temperature and
moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must thoroughly clean
both sections to eliminate odors. To avoid odor transfer and drying out of
food, wrap or cover foods tightly.
Dual Evaporator (on some models)
Some models come equipped with a dual sequential evaporation system,
which includes two separate evaporators for the refrigerator and freezer
compartments.
Dual evaporation results in higher humidity, which helps keep foods in
the refrigerator from spoiling as quickly and improves food quality and
freshness in the freezer due to decreased freezer burn. In addition, the
dual evaporation system helps keep food smells in the refrigerator from
transferring to ice in the freezer.
16
Air circulates through vents within each compartment, and does not
transfer between the compartments.
Style 2
Do not block any of these vents with food such as soda, cereal, bread, etc.
If the vents are blocked, airflow will be obstructed and temperature and
moisture problems may occur.
NOTE: The dual evaporation system is always activated when your
refrigerator is operating. You do not need to press any buttons to turn it on.
The refrigerator and freezer controls are located on the dispenser panel.
IMPORTANT: The display screen on the dispenser control panel will turn off
automatically and enter "sleep" mode when the control buttons and
dispenser pad have not been used for 2 minutes or more. While in "sleep"
mode, the first press of a control button will only reactivate the display
screen, without changing any settings.

Using the Controls

Touch any control button on the dispenser panel to activate the display
screen. The home screen will appear as shown.