Specifications; Common Specifications - Franklin Electric MONODRIVE UTILITY Manual Del Usuario

SPECIFICATIONS

Common Specifications

NEMA 3R
Model
(indoor/outdoor)
Voltage
Phase In
Frequency
Current (max)
Input from
Power Source
Power Factor
Power (idle)
Power (max)
Wire Gauge Size(s)
Voltage
Phase Out
Output to Motor Frequency Range
Current (max)
Wire Gage Size(s)
Factory Preset
Pressure
Setting
Adjustment Range
Temperature
Operating
(at 230 VAC input)
Conditions*
Relative Humidity
Temperature
Storage**
Shelf Life
Dimensions
NEMA 3R
and Weight
Recommended
FE 230 VAC Motors
For Use With
* Operating temperature is specified at full output power when installed as recommended. Refer to
"Over Temperature Foldback" on page
** Shelf life can be extended for one year by powering the drive for 60 minutes with no load.
MonoDrive Utility
5870202203 with Pressure Sensor
230 ± 10% VAC
Single-Phase
60 Hz
20 A
~ 0.52
3 Watts
2.5 kW
Refer to "Fuse/Circuit Breaker and Wire Sizing" on page
230 VAC Maximum
Single-Phase (3-Wire)
30 – 63 Hz Submersible
13.2 A (based on motor SFA)
Refer to "Maximum Motor Cable Length" on page
50 psi (3.4 bar)
Pressure Sensor: 25-80 psi (1.7-5.5 bar)
Transducer: 5-95% of transducer range
–13 °F to 122 °F (–25 °C to 50 °C)
20-95%, non-condensing
–13 °F to 149 °F (–25 °C to 65 °C)
1.5 Years
9-3/4" x 16-3/4" x 5-1/4" : 20 lbs
(25 x 42.5 x 13 cm) : (9 kg)
214505 - series (1/2 HP, 0.37 kW) single-phase, 3-Wire
214507 - series (3/4 HP, 0.55 kW) single-phase, 3-Wire
214508 - series (1.0 HP, 0.75 kW) single-phase, 3-Wire
224300 - series (1.5 HP, 1.1 kW) single-phase, 3-Wire
224301 - series (2.0 HP, 1.5 kW) single-phase, 3-Wire
28.
Common Specifications
17.
17.
SPECIFICATIONS
37