Schulz S1200MG Manual De Instrucciones página 88

1.
INFORMATION ON THE READING SCREEN
With the generator working under normal condition, press the
reading screens
Example:
The above alarm cannot be canceled using the "MENU" button; you must turn off the system's power to reset.
Check the causes of the problem and correct them before using the generator again. If you have any questions,
consult a qualified electrician with knowledge of the equipment. Contact Customer Service for any additional
information.
2.
INFORMATION ON THE READING SCREEN
With the generator working under normal condition, press the
reading screens
Example:
3.
CONFIGURATION OF THE CONTROL PARAMETERS
Preferably with the generator stopped, press the "MENU" key to access the configuration parameters. The
follow screen should appear:
Use the [up arrow] and
each protection function "on" or "off":
• "Voltage": upper and lower protection limits for the output voltage;
• "Current": upper limit of output current;
• "Battery": upper and lower protection limits for the battery voltage;
• "Machine Temp": upper limit of temperature of the generator (above this limit, it shuts down for protection);
• "Oil Pressure": lower protection limit for the oil pressure;
• "Password": password configuration.
Press the [right arrow] key to enter the configuration mode for the selected parameter. For example, when
the arrow is pointing to "Voltage", press the
meter and make the desired protection adjustment.
Example
Total time:
Partial time: 5h32m11s
Frequency: 60.1Hz
Battery voltage: 13.5V
[down arrow] navigation keys to select the desired parameters and to turn
MÍN MÁX
000
[right arrow] key to navigate through the
VOLTAGE: 220V
CURRENT: 13,5A
Temperature of the
generator: 45°C
VOLTAGE
CURRENT
[right arrow] key to navigate through the
[right arrow] to access the configuration screen for this para-
000 OFF
88