Pattern Selector Dial; Selecting Stretch Stitch Patterns; Stitch Length Dial; Stitch Width Dial - Baby Lock A-Line Serie Guía De Referencia Rápida

•
0 1 2 4
3
•
•
34
All manuals and user guides at all-guides.com

• Pattern Selector Dial

Raise the needle above the fabric and match the
desired pattern with the setting mark by turning
the pattern selector dial.

• Selecting Stretch Stitch Patterns

When sewing stretch stitch, set the stitch length
dial at " S.S. ".

• Stitch Length Dial

+ S.S. -
• •
•
• The higher the number, the longer the stitch
• "
•
• Adjust the dial in the 0.3 to 4 range when you sew
• Place S.S. at the setting mark to sew the
• If forward and reverse feeding becomes unbalanced
Turn the stitch width dial to set the desired stitch
width at the setting mark.
The higher the number, the wider the stitch width.
Raise the needle above the fabric, when you turn

• Variable Needle Positions

Select straight stitch "A" and turn the stitch width dial
for needle positions ranging from the center (when
set on 5) to the left position (when set on 0).
Place the desired number at the setting mark by
turning the stitch length dial.
length.
" is the correct setting for buttonhole
stitching.
the zigzag stitch.
stretch stitch pattern correctly.
due to the type of fabric, adjust the balance as
follows:
If patterns are compressed, turn the dial toward
" + ".
If patterns are drawn out, turn the dial toward " – ".

Stitch Width Dial

Note :
the stitch width dial.