Zipro Flame Manual De Uso página 29

EN
STEP 3.
Install the cover (11) onto the handlebar post (12).
Connect the computer cable (3) to the connecting
cable (16).
Fix the handlebar post (12) to the main frame (1)
with Allen bolts (14), spring washers (15), and
curved washers (13).
Slide the handlebar post cover on (11).
STEP 4.
Fix the saddle (34) and a towel holder (44) to the
saddle guide (33) using nuts (41) and flat washers
(40). Fix the guide (33) with the saddle (34) to the
saddle post (29).
Set the saddle to the right position and lock it with
the horizontal adjustment knob (30) and washer
(32).
Slide the post (13) with the saddle (34) into the
rear part of the main frame. Position the saddle at
the desired height and lock it with the vertical
adjustment knob (31).
NOTE! Do not exceed the maximum and minimum
height when adjusting the saddle height.
NOTE! Before using the device, make sure the
saddle is stable in the guide.
29