Sbm 55S Nw - Sicam SBM 55S NW Manual Original

en 36 | SBM 55S NW | User information
3.5

SBM 55S NW

12
10
13
Fig. 4: SBM 55S NW
Item Designation
1 Control/display panel
2 Vernier caliper (electronic)
3 Wheel guard
4 Pedal
5 Tray
6 On/Off switch
7 Accessories support
8 Mains socket
9 Connection for angular
width gauge*
10 Quick-action clamping nut
11 Centering flange
12 Manual vernier caliper
13 Measuring compasses
*Depending on version, special accessory in some cases
|
1 695 656 114 2012-03-28
11
9
8
6
Functions
Operation of SBM 55S NW, refer to Section 7
R Recording of rim distance and rim diameter.
R Determination of positions for attachment of adhesive weights.
R Protects the operator against flying particles (e. g. dirt, water).
R Starting and stopping measurement, refer to Section 10.1
Locking of shaft / wheel.
For storing balance weights and accessories
Switching on and off.
For storing accessories
Connection for power cord.
Connect the angular width gauge to the machine.
Centre and tighten the wheel on the cone.
Support the wheel and enable its fixing.
Manual measuring of the width and to position the weights.
Manual measuring of the width and the rim's diameter.
3
1
5
7
4
Sicam srl società unipersonale
2