Sicam SBM 55S NW Manual Original página 50

en 50 | SBM 55S NW | Balancing a wheel
$
with internal clamp;
8.8.1 Fastening adhesive weights with electronic
calliper gauge
1. Insert the adhesive weight of the value required for
balancing in the specific seat on the feeler;
2. Remove the feeler towards balancing position and
wait for the acoustic confirmation signal;
3. Rotate the calliper in order to move the feeler closer
to the rim and apply the weight.
Fig. 15: Internal adhesive weight application example
Fig. 16: External adhesive weight application example
|
1 695 656 114 2012-03-28
651076-36_Im
8.8.2 Fixing the adhesive weights with internal
clamp
Fig. 17: Weights positioning gauge
1 Weights positioning gauge grip
2 Weights positioning gauge head
3 Inner weight pliers
4. Ejector
5 Outer weight pliers
6 Millimetric scale
7 Knurled screw
8 Slider with stop
!
For the standard programs use the weights positio-
ning gauge internal clamp to position the adhesive
weight in the internal plane and in the external plane.
1. Insert the necessary adhesive weight in the internal
clamp for weights.
2. Position the weights positioning gauge head (2) on
the rim edge using the internal clamp (3) in contact
with the rim itself.
C
Fig. 18: External adhesive weight application example
3. Using ejector (4) apply the adhesive weight and push
it to adhere well.
4
Sicam srl società unipersonale