Eldom wroom BK4S Manual De Instrucciones página 9

GENERAL DESCRIPTION
1
Measuring Cup
2 Lid
3
Glass Jar
4 Sealing ring
5
Cutting blade
6
Cup base
7 Motor Base
8
Rotary switch
9 Jar Assembly
TECHNICAL DATA
Power: 400 W
Mains voltage: 220-240V ~ 50Hz
Maximum time of continuous operation:
3 min
Break before continuation of operation:
1 min
OPERATION
(see section: cleaning and maintenance).
ASSEMBLING THE GLASS JAR:
•
• Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
• Put the blade unit with sealing ring into the cup base (6).
• Insert the assembled Cup Base onto the bottom of the glass jar and secure tightly.
• Mount the glass cup (3) onto the cup base unit and tune the cup base unit, and turn clockwise until glass jar
locks into place.
• Mount the Measure Cup (1) onto the Lid (2).
• Secure the Lid onto Glass Jar and press down.
HOW TO USE:
•
• Put the lid on the glass jar and close securely. Place the measuring cap into the hole in the lid and turn
clockwise to lock.
• Switch on the motor base (see table: speed setting)
Make sure you observe the maximum time of continuous operation of the appliance.
Exceeding the time limit and failing to provide appropriate breaks during the operation of the appliance may
cause irreparable damage to the engine.
After using the blender, always move the switch into the '0' setting and pull out the mains
plug.
8
9
OPERATING INSTRUCTION
9
8
7
BLENDER BK4S
1
6
EN
2
3
4
5