Columbus McKinnon Tigrip TWH 30 Instrucciones De Servicio página 15

15
It is forbidden to apply lateral tensile forces to the load lifting attachment.
Always insert the load fully into the mouth of the clamp.
Do not use the base frame for lifting further load lifting attachments or for attaching loads by
means of ropes, belts or chains.
The clamps must be arranged on the load in such a way that inclination angle β never is larger
than 45°.
If more than 2 load lifting attachments are used, a spreader beam must be used in order to
avoid impermissible lateral tensile forces.
Do not allow the load lifting attachment to fall from a large height.
The unit must not be used in potentially explosive atmospheres.
©
2016 Columbus McKinnon Industrial Products GmbH