Motorola PMLN6393 Serie Guia Del Usuario página 10

• Slide down the adaptor grooves into the power supply until it snaps
into place.
• Slide the adaptor upward to remove.
Note: The adaptor shown in the pictures are for illustration purposes.
TROUBLESHOOTING
When troubleshooting, always observe the color of the LED:
LED
Indication
Charger successfully powered
up and is ready for use.
Single
Flash
Green
No Battery in Pocket
•
Off
•
8
Charger State
The Charger identified
the Battery as invalid or
damaged
The Charger may have
detected an open or
shorted Battery contact
Comment
The charger is ready for
use.
If a battery is in the pocket,
ensure that the power
supply is plugged into the
proper main outlet.
If the indication continues,
remove the battery.
Inspect the charger and
battery contacts to ensure
they are clean. Reinsert
the battery.