Dubbing; Dubbing A Single Title (Title Dubbing) - Sony DAR-X1R Manual De Instrucciones

Dubbing

+
HDD RW
- R
Video
Dubbing a single title (Title
Dubbing)
1
Insert the DVD that you are going to dub to
or from.
2
Press HDD or DVD to select the source.
3
Press TITLE LIST.
Press </, to switch the Title Lists, if
necessary.
4
Select a title, and press
The sub-menu appears.
5
Select "Dubbing," and press
The display for selecting the dubbing mode
appears.
If a title with
the title list, a confirmation display is
displayed.
To "Move," select "OK."
A Size of the title (approximate)
This is displayed in red when the size
exceeds the available space on the
dubbing target media.
B Direction of dubbing
C Available space on the disc to be
dubbed (approximate)
D Information about the title to be dubbed
E Dubbing mode and the disc space
required to dub the title (approximate)
GB
102
- RW - RW +
R
VR
Video
.
.
(page 101) is selected in
6
Select "Dub Mode."
7
Select a dubbing mode using M/m.
Fast*
- R
VR
* From the HDD to a DVD only.
Appears when High-speed Dubbing is available
for the title (page 99).
8
Select "Start," and press
The remaining time of dubbing appears in the
front panel display.
To automatically adjust the dubbing mode
If there is not enough available space on the target
disc, the recorder automatically selects a dubbing
mode with lower picture quality according to the
available space. If there is insufficient disc space
in the selected dubbing mode, the following
display appears after step 8.
Select "OK" and go to step 8.
To manually select another dubbing mode, select
"Cancel," and go to step 7.
To stop dubbing
Press OPTIONS to select "Stop Dubbing," and
press . When asked for confirmation, select
"OK," and press
When dubbing (Move) is stopped partway, no part
of the title will be moved to the dubbing target.
However, note that this will decrease the free disc
space for DVD+Rs/DVD-Rs.
z Hint
You can turn off the recorder during dubbing. The
recorder completes dubbing even after being turned off.
.
.