Erasing Multiple Titles (Erase Titles); Erasing A Section Of A Title (A-B Erase) - Sony DAR-X1R Manual De Instrucciones

"Set Thumbnail": Changes the title's
thumbnail picture that appears in the Title List
(page 47).
"Make a Playlist": Adds the entire title to the
Playlist title as one scene (page 97).
z Hints
• You can erase multiple titles at one time (page 93).
• You can label or re-label DVDs (page 51).
b
Note
DVD-RW/DVD-R (VR mode) playlist titles cannot be
protected.
Erasing multiple titles (Erase
Titles)
HDD + RW - RW
VR
- R
Video
You can select and erase more than one title at one
time using the OPTIONS menu.
1
Press TITLE LIST.
For HDD titles or DVD-RWs/DVD-Rs in VR
</,
mode, press
if necessary.
2
Press OPTIONS to select "Erase Titles,"
and press .
The display for selecting titles to be erased
appears.
3
Select a title, and press
A check mark appears in the check box next to
the selected title.
• To clear the check mark, press
• To clear all of check marks, select "Reset."
4
Repeat step 3 to select all of the titles you
want to erase.
- RW + R
- R
VR
Video
to switch the Title Lists,
.
again.
5
When you finish selecting titles, select
"OK," and press
The list of the titles to be erased appears for
confirmation.
• To change the selection, select "Change,"
and repeat from step 3.
6
Select "OK" and press
The titles are erased.
To erase all titles on the disc
You can reformat the HDD, DVD+RW, or DVD-
RW to make the disc or drive blank.
To format the HDD, see "Format" on page 127.
To format a DVD+RW or DVD-RW disc, see
"8. Reformatting a disc" on page 54.
Erasing a section of a title (A-B
Erase)
HDD + RW - RW
VR
You can select a section (scene) in a title and erase
it. Note that erasing scenes in a title cannot be
undone.
1
After step 2 of "Erasing and Editing a
Title," select "A-B Erase" and press
The display for setting point A appears. The
title starts to play.
• To return to the beginning of the title, press
X and then press ..
Playback point
2
Select point A using
.
Playback pauses.
3
Press if point A is correct.
If point A is incorrect, select point A using
c/C, and press
point B appears.
.
.
- R
VR
.
/ , and press
m M
. The display for setting
,continued
GB
93