Sony DAR-X1R Manual De Instrucciones página 121

Top view
Front speaker (L)
Calibration mic
The front of each speaker should face parallel
to the calibration mic, and there should be no
obstruction between them.
b
Note
Place the calibration mic so that the "FRONT" side
of it is pointed toward the front speakers.
2
Press SYSTEM MENU.
The System Menu appears.
3
Select "SETUP," and press
4
Front speaker (R)
Parallel
5
FRONT
6
.
Select "Audio," and press
Select "Auto Calibration," and press
Select "Yes," and press
Calibration starts.
b
Notes
• Avoid being in the measurement area and making
noise during the measurement (about 1 minute), to
avoid measurement failure. During the
measurement, test signals are output from the
speakers.
• Reflections from walls or the floor may affect
measurements.
• If an error message appears, follow the message,
then select "Yes".
An error message appears when:
– the calibration mic is not connected.
– front speakers are not correctly connected.
– subwoofer is not connected.
– the left and right speakers are reversed.
– the left and right of the calibration mic are
reversed.
.
.
.
GB
,continued 121