System Information - Handpiece Experts Torque Power BL ISO Manual Del Operador

Distributed by Handpiece Experts Inc.
Operating Instructions Torque Power BL ISO
7

System information

Torque Power BL ISO Torque Power BL ISO
Bur Speed Bur Speed
Gear Ratio Motor Speed
Motor Speed Motor Speed Gear Ratio Gear Ratio
X.x
20
13
Bur Speed
Gear Ratio
Motor Speed Gear Ratio
X.x
Torque Power BL ISO Torque Power BL ISO
Bur Speed
Gear Ratio Motor Speed
Motor Speed Gear Ratio
62 28 527 D 3547
D 3547.201.01.01.02
1 2
3
Endo
Torque Power BL ISO Torque Power BL ISO
1 2
Motor Speed
3
Endo
1 2
3
Endo
Entering the system information display mode
Press the instrument light key (20) and save key 2 simul-
taneously for more than 3 s.
The information designation, e.g.
on the "Bur Speed" display. At the same time, the corre-
X.x
sponding value , appears on the gear ratio display.
You are now in the "System information" display mode.
The selection of the system information is made via
the +/– keys for the gear ratio (13).
The name of the system information appears on the
"Bur Speed" display and the corresponding value
appears on the "Gear Ratio" display.
Order of the system information:
1 Software no. motherboard
2 Software no. display PC board SOFT_d
Briefly press the Endo save key to quit the
"System Information" display mode.
7 System information
then appears
SOFT_E X.X
X.X
19