123ignition 123/FIAT Instrucciones De Instalación página 7

Installation instructions for the 123\FIAT & 123\FIAT-PLUS
The 123\FIAT is designed for 2 cyl. FIAT-engines ; and can be used on standard engines (curve '0' - '3')
but it also offers 12 curves ('4' to 'F') for tuning-purposes and/or for driving on other fuels like E85.
To choose between the different advance-curves, the user can open the front of the housing, and select
the curve of his choice by turning a rotary-switch indicated '0' to 'F'. (see 'curves' under 'Technical Data')
Technical data "123\FIAT" & "123\FIAT-PLUS"
operating voltage
max.range
temperature
coil
static setting
curves
mode
'0'
'1'
: 4,0 to 15,0 Volts
: 8000 rpm
: -30 to +100 degrees Celsius
: double coil ( like 123's # 4240 )
: Top Dead Center (TDC)
: 16 different ones for a variety of 2 cyl. FIAT - engines, selectable by the built-in
rotary-switch.
engine-type
FIAT 500 F/L/R
FIAT 126 650 cc
FIAT 126 600 cc after
enginenr. : 4490214
as curve nr. '0' ; this
includes idle-control
degr.@2000 rpm degr.@ 3000 rpm
16,8
16,8
UK
28,0
28,0