Oil Level Warning Light Checking Method - Yamaha Blaster YFS200R Manual Del Propietário

EBU00757

Oil level warning light checking method

Oil level warning light
does not come on
(see NOTE).
Ask a Yamaha dealer to
inspect the electrical circuit.
NOTE:
If the main switch is turned off after the oil level
warning light goes off and the engine is immedi-
ately started again, the oil level warning light
may not come on. This does not indicate a cir-
cuit failure.
Turn the main switch to
"ON" and the engine
stop switch to"RUN".
Start the engine.
Oil level warning
light comes on.
Wait a few seconds.
The oil level warning light
goes off.
Engine oil level and
electrical circuit are OK.
4-5
The oil level warning
light stays on.
Supply engine oil.