Maintenance And Warranty; Cleaning And Maintenance; Warranty; Disposal Of The Adcc - Afinion 1115660 Manual Del Usuario

12 MAINTENANCE AND WARRANTY

12.1 Cleaning and maintenance

No maintenance of the Afinion™ Data Connectivity Converter is required other than cleaning the exterior. Clean the outside of the ADCC with
clean, lint-free and non-abrasive cloth dampened in water or a mild detergent.

12.2 Warranty

Axis-Shield PoC guarantees a warranty period of 12 months from the date of delivery to the user. For this period it is guaranteed that the Afinion™
Data Connectivity Converter works within quality requirements valid on the date of manufacture release.
Axis-Shield PoC is prepared to compensate for faulty material or malfunctions within the limitations of the warranty. The warranty is limited to
providing a replacement Afinion™ Data Connectivity Converter.
Tampering with the internal components, damage due to operating errors, misuse and overlooking essential information with respect to warnings and
precautions described in this User Manual will invalidate the warranty.
The acknowledgment of claims shall immediately be reported to your local Afinion™ supplier.

13 DISPOSAL OF THE ADCC

For correct disposal according to the Directive 2002/96/EC (WEEE), contact your local Afinion™ supplier.

14 TECHNICAL SPECIFICATIONS

Afinion™ Data Connectivity Converter
Size 110 x 248 x 372 mm
Weight 125 g
Power supply The ADCC gets power (5 V) from the Afinion through the USB cable. The USB cable acts, in this case, only as a
power connector
Communication interface Afinion™ AS100 Analyzer to ADCC: RS232
ADCC output: Ethernet
Operation conditions
Temperature 15 – 40 ºC / 59 - 104 ºF
Relative humidity 0 – 90%
Storage and transport (in the original container)
Temperature -40 – 70 ºC / -40 – 158 ºF
Relative humidity 0 – 90%

15 THIRD PARTY SOFTWARE COMPONENT

This product contains third party lwIP TCP IP Stack software.
http://www.sics.se/~adam/lwip/
Copyright (c) 2001, 2002 Swedish Institute of Computer Science.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR «AS IS» AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
All manuals and user guides at all-guides.com
9
GB
US