Publicidad
Idiomas disponibles
Idiomas disponibles
CEBORA S.p.A.
2
SYSTEM DESCRIPTION.
The Cebora SOUND MIG ROBOT PULSE Welding System is a multi-process system for pulsed
synergic MIG/MAG, non-pulsed synergic MIG/MAG, and conventional MIG/MAG welding, developed
for use in combination with a Welding Robot arm on automated welding systems.
It comprises a power source, possibly equipped with cooling unit, a wire feeder, a control panel and a
Robot Interface (see fig. 1).
Power Source – Control panel cable connection (art. 1199.00, l = 5m; art. 1199.20, l = 10m).
1
Power Source – Wire feeder extension
2
Power Source – Robot Interface signal cable connection (art. 1200, l = 5m).
3
Power Source – Robot Interface CANopen cable (1.5 m long, included in the Robot Interface).
4
5
Robot control cabinet.
6
Welding wire 15 Kg spool holder (art. 121).
7
MIG Torch.
8
Wire Feeder unit (WF4-R1, art. 1657; WF4-R2, art. 1658).
10 Welding wire sheath (art. 1935.00, l = 1,6 m; art. 1935.01, per Marathon Pack).
21 Power Source (MIG 3840/T art. 387.80; MIG 5040/T art. 389.80).
22 Cooling unit (GR54 o GR52).
24 Power Source Control Panel (full version , art. 208.00; light version, 208.10).
25 Robot Interface (RDI 210, art. 210; RAI 211, art. 211; RAI 217, art. 217).
26 For RDI210: cable "DeviceNet", (cod. 5585987, l = 2 m, included in Robot Interface).
For RAI211 e RAI217: dedicated multiwire wiring.
This Instruction Manual refers to the Power Source, equipped with Cooling Unit, and has been prepared
to educate the personnel assigned to install, operate and maintain the welding machine. It must be stored
carefully in a place familiar to users, and consulted whenever there are doubts. It must be kept for the
entire operative life-span of the machine, and used to order spare parts.
The Cebora SOUND MIG ROBOT PULSE system has two models of Power Source to choose from, one
or the other, based on system needs, and two Cooling Units that may or may not be used in combination
with the Power Sources:
Power source MIG 3840/T art. 387.80. Cooling Unit GR54 (for art. 387).
Power source MIG 5040/T art. 389.80. Cooling Unit GR52 (for art. 389).
3300305-B
fig. 1
(WF4-R1 : art. 1197.00, l = 5m; art. 1197.20, l = 10m).
(WF4-R2 : art. 1173.00, l = 5m; art. 1173.20, l = 10m).
13
GB
18-03-2016
Publicidad
