Descargar Imprimir esta página

Beta RE 125 2009 Manual De Instrucciones página 15

Publicidad

Per il passaggio alla pagina succes-
siva occorre disattivare la figura 5.
1
La disattivazione avviene a due livelli:
1°- Mantenendo cronometro in fun-
zione. Premere MODE da figura 6
per un tempo compreso fra 1 e 2
secondi fino alla ricomparsa del-
la figura 5. Rilasciare il comando.
Ripremendo MODE brevemente
si passa alla figura 7. Il cronometro
resta in funzione indicato da LAP
che lampeggia.
2°- Arrestando il cronometro. Pre-
mere MODE da figura 6 per un
tempo superiore ai 2 secondi, si
evidenzierà prima la figura 5, poi
ancora la figura 6 con indicato il
tempo segnato dal cronometro.
Al rilascio il cronometro viene az-
zerato e fermato. Premendo
MODE per un tempo da 1 a 2
secondi ricompare la figura 5.
Ripremendo MODE brevemente
si passa alla figura 7.
14
All manuals and user guides at all-guides.com
Fig. 6
To skip to the next page, one must
first exit the screen shown in by fol-
lowing either of these procedures:
1°-While the stopwatch is running. Press
MODE (Figure 6) for 1 to 2 seconds
until the screen shown in Figure 5 is
displayed, then release the button.
Pressing MODE again for a short
time brings up the screen shown in
Figure 7. LAP blinks to denote that
the stopwatch is still running.
2°-After stopping the stopwatch.
Pressing MODE for more than 2
seconds while the screen shown
in Figure 6 is displayed first brings
up the screen shown in Figure 5
and then the screen shown in Fig-
ure 6, displaying the time re-
corded by the stopwatch. When
the button is released, the stop-
watch is reset and stopped. Press-
ing MODE for 1 to 2 seconds
brings up the screen shown in Fig-
ure 5 again. Pressing MODE for a
short time brings up the screen
shown in Figure 7.

Publicidad

loading