Henry Schein MD300K2 Instrucciones De Uso página 199

Guidance and manufacturer's declaration- electromagnetic immunity-
Guidance and manufacturer's declaration- electromagnetic immunity-
For EQUIPMENT and SYSTEM that are not LIFE-SUPPORTING
Guidance and manufacturer's declaration – electromagnetic immunity
Guidance and manufacturer's declaration- electromagnetic immunity
The model MD3 0 0 K 2 Pulse Oximeter is intended for use in the electromagnetic
specified below. The customer of the user of the MD3 0 0 K 2 Pulse Oximeter should
The model MD300K2 Pulse Oximeter is intended for use in the electromagnetic environment specified
assure that it is used in such an environment.
below. The customer or the user of the model MD300K2 Pulse Oximeter should assure that it is used in
such an environment.
Immunity test
Immunity test
Conducted RF
IEC 6 1 0 0 0 -4 -6
Radiated
Conducted RF
RF IEC
IEC 61000-4-6
6 1 0 0 0 - 4 -3
Radiated RF
IEC 61000-4-3
NOTE1 At 80MHz and 800MHz, the higher frequency range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is
For EQUIPMENT and SYSTEM that are not LIFE-SUPPORTING
IEC 60601
test level
IEC 60601 test level
3 Vrms
1 5 0 kHz
to 8 0 MHz
3 V/m
3Vrms 150kHz to
8 0 MHz
80kHz
to 2. 5 GHz
3V/m 80MHz to
2.5GHz
Compliance Electromagnetic
environment-guidance
level
Compliance level
Portable and mobile RF
communications equipment
should be used no closer to
any part of the model MD 3 0 0 K 2
Pulse Oximeter, including
3 V
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance
3 V/m
3V
Where P is the maximum output
power rating of the transmitter
3V/m
in Watts (W) according to the
transmitter manufacturer and d
is the recommended separation
distance in metres (m).
transmitters, as determined
by an electromagnetic site
survey,
the compliance level in each
frequency range.
Interference may occur in the
vicinity of equipment marked
with the following symbol:
- 29 -
Electromagnetic environment-
guidane
Portable and mobile RF commu-
nications equipment should be
used no closer to any part of the
model MD300K2 Pulse Oximeter,
including cables, than the re-
commended separation distance
calculated from the equation
applicable to the frequency of
the transmitter. Recommended
3.5
separation distance
d=
P
V
1
d=1.2 √P
150KHz to 80 MHz
3.5
d= 8 0 MHz to 8 0 0 MHz
P
E
1
d=1.2 √P
80MHz to 800MHz
7
d= 8 0 0 MHz to 2. 5 GHz
P
E
1
d=2.3 √P
800MHz to 2.5GHz
Where P is the maximum output
power rating of the transmitter in
Watts (W) according to the trans-
mitter manufacture and d is the
recommended separation distan-
ce in meters (m). Field strengths
from fixed RF transmitters, as
a
should be less than
determined by an electromagnetic
site survey,a should be less than
b
the compliance level in each fre-
quency range.b Interference may
occur in the vicinity of equipment
marked with the following symbol:
b
199