Initial Setup - BD PureWick PW200E Guía Del Usuario Y Garantía

Initial Setup

1. Inspect the package for damage. If any damage is noticed,
contact Customer Support immediately.
2. Carefully remove all contents from the package, including
the packing material and inspect prior to use. If any
damage is noticed, contact Customer Support immediately.
3. Place the PureWick™ Urine Collection System (A) next to the
bed or chair where it will be used. It must be close enough for
the collector tubing with elbow connector (G) to easily reach
the user and should be placed on a stable, even surface.
For optimal results, position the PureWick™ Urine Collection
System either on the floor or as close to the floor as your
facility's protocol will allow.
Note: The PureWick™ Urine Collection System should be
stationary while in use. Device is not designed to be used
while in transport.
CAUTION: Avoid creating a tripping hazard with the
collector tubing or power cord.
4. Plug the PureWick™ Urine Collection System power cord into
device outlet (B) and into an A/C power outlet.
Note: The device should be positioned for easy access to the
A/C inlet and power cord.
Note: Make sure the power switch is turned off before
connecting the power cord.
• Battery Power Operation
The built-in battery recharges any time the device is
plugged into an outlet. To fully charge the battery, the
system must be plugged in for 12 hours. The battery
will supply 8 hours of backup power before requiring
recharging. The PureWick™ Urine Collection System
remains fully functional while the device is recharging.
Battery Life Status - Green LED Light
No Light Device is powered off
Solid Device is on and fully charged
Slow Blink Device is charging
Fast Blink Operating on battery; battery less than 20%
Note: If it is too cold or hot, charging time may be longer or battery may
not fully charge.
D
F
A
B
E
H
G
C
I
5. Place the collection canister (C) in the PureWick™ Urine
Collection System base and press down firmly on the lid
making sure the lid is sealed. Optional (prior to sealing
canister lid): While operating the PureWick™ Urine Collection
System, ammonia odor for up to 1800 mL of urine can be
eliminated by adding 2 teaspoons (10 grams) of vitamin
C (ascorbic acid) powder into the collection canister before
use. At least 99.93% of pure vitamin C (ascorbic acid) is
recommended. If using the privacy cover (J), slip privacy
cover onto canister (similar to a coffee cup sleeve) prior to
placing canister into the base. Attach the pump tubing (D)
to the PureWick™ Urine Collection System connector port (F)
and the connector port (E) on the collection canister lid.
6. Attach the collector tubing (G) to the connector port (H)
on the collection canister lid. Connect the other end of the
collector tubing securely to a PureWick™ External Catheter (I).
CAUTION: It is important that the port connections be
connected correctly and securely for proper operation of the
PureWick™ Urine Collection System.
7. Turn on the PureWick™ Urine Collection System by pressing
the ON/OFF switch. The PureWick™ Urine Collection System is
working when the switch lights up green and the device makes
a soft humming sound. The system is now ready for use.
Operating Instructions
1. After the PureWick™ Urine Collection System has been set
up, place the PureWick™ External Catheter according to the
PureWick™ External Catheter's instructions for use.
2. When the canister is ready to be emptied, remove the
PureWick™ External Catheter according to the PureWick™
External Catheter's instructions for use and throw away.
Note: Keep the PureWick™ Urine Collection System ON
to make sure all urine has been drawn out of the collector
tubing and into the collection canister before removing the
PureWick™ External Catheter.
3. Note: Although the canister can hold up to 2000cc (mL), to
prevent overflow empty urine from the collection canister
regularly or before volume reaches 1800cc (mL). Turn off
the PureWick™ Urine Collection System by pressing the ON/
OFF switch. Disconnect the A/C power cord from the power
PureWick™ Urine Collection System
Device electrical cord port
2000cc Collection canister with lid
Pump tubing
Pump tubing port to canister
Connector port for pump tubing
Collector tubing with elbow connector
Connector port for collector tubing
Attach PureWick™ External Catheter
(sold separately)
4
Privacy Cover
(optional)
slides onto
Collection
Canister
as shown