Denon AVR-3803 Instrucciones De Operación página 23

3
Use the • and ª cursor buttons to display the
mode for which you want to make the punch
through setting, then press the ENTER button.
• "SEL" appears on the remote control unit's
display.
The display switches as shown below each
time the • and ª cursor buttons are
pressed.
AMP
DBS CABLE TV ALL
It is also possible to select the mode directly
using the mode buttons.
Setting the back light's lighting time
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• "PRE" appears on the remote control unit's
display.
2 Use the • and ª cursor buttons to display
"BKLT" on the remote control unit, then press
the ENTER button.
• "05SEC" appears on the remote control unit's
display.
3
Use the • and ª cursor buttons to adjust the
lighting time (3 sec ~ 30 sec), then press the
ENTER button.
• "OK" is displayed and that lighting time is set.
4
Use the • and ª cursor buttons to display the
mode you want to punch through, then press
the ENTER button.
• "OK" is displayed and the punch through is
set.
The display switches as shown below each
time the • and ª cursor buttons are
pressed.
CD CDR MD TAPE DVD
VCR2 VCR1 VDP
It is also possible to select the mode directly
using the mode buttons.
1 1
DVD
2, 3
2, 3
Resetting
(1) Resetting the preset memory
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• "PRE" appears on the remote control unit's
display.
2 Use the • and ª cursor buttons to display
"RST" on the remote control unit, then press
the ENTER button.
• "PRE" is displayed.
3
Use the • and ª cursor buttons to display
"PRE" on the remote control unit, then press
the ENTER button.
• After "SEL" is displayed on the remote
control unit's display, the registered preset
memory is displayed on the remote control
unit's display.
4
Use the • and ª cursor buttons
to select the code to be reset.
5 When the mode you want to reset is shown on
the remote control unit's display, press the
ENTER button to reset the preset memory.
• The LCD's back light flashes during the
resetting operation, and when the operation is
completed, "OK" is displayed and the set
returns to the normal operating mode.
ENGLISH
1 1
DVD
2, 3, 4
2, 3, 5
23