Denon AVR-3803 Instrucciones De Operación página 36

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 195
ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order
each time the DSP SIMULATION button is pressed:
WIDE SCREEN
SUPER STADIUM
ROCK ARENA
VIRTUAL
MATRIX
VIDEO GAME
MONO MOVIE
2
Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
(Remote control unit)
3
(Remote control unit)
4
To end the setting mode, press the surround parameter button again.
(Remote control unit)
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the 0 courser button is pressed, "CINEMA EQ." and "D.COMP." are
automatically turned off, "ROOM SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to
"30ms" and "LFE" to "0 dB".
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size
of the sound field, not the actual size of the listening room.
36
JAZZ CLUB
CLASSIC CONCERT
Set the parameters.
• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround
mode.
SELECT
1
(Main unit)
• When turned clockwise
DIRECT
STEREO
DOLBY PRO LOGIC
VIRTUAL
MATRIX
VIDEO GAME
2, 4
• When turned counterclockwise
3
DIRECT
STEREO
DOLBY PRO LOGIC
VIRTUAL
MATRIX
VIDEO GAME
To select the surround mode while adjusting the surround parameters or tone control, press the
surround mode button then operate the selector.
(Main unit)
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to
set.
• The parameters which can be set differ for the different surround modes. (Refer to
"Surround Modes and Parameters" on page 38.
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DTS NEO:6 modes and
the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS
surround.
II
DTS NEO:6
5/7CH STEREO
WIDE SCREEN
SUPER STADIUM
MONO MOVIE
CLASSIC CONCERT
JAZZ CLUB
ROCK ARENA
II
DTS NEO:6
5/7CH STEREO
WIDE SCREEN
SUPER STADIUM
MONO MOVIE
CLASSIC CONCERT
JAZZ CLUB
ROCK ARENA
1 2
1,3

Publicidad

Tabla de contenido
loading

Tabla de contenido