Cleaning The Robot And Charging Dock; Main Brush, Side Brushes And Driving Wheels - ECOVACS DEEBOT D8 Serie Manual De Instrucciones

4.2 Cleaning the Robot and Charging Dock

Clean the Robot
Turn the bottom power switch to the OFF position.
Use a cleaning cloth dampened with water or neutral detergent, wipe and dry the product. Do not let water
penetrate inside the product.

4.3 Main Brush, Side Brushes and Driving Wheels

Cleaning the Main Brush
It is suggested to clean Main Brush after every 4 - 5 cleaning cycles.
Cleaning and Replacing the Side Brushes
Tips:
1. The Side Brushes incur a lot of wear. We suggest you inspect them after each use and change if necessary.
2. When installing a Side Brush, make sure its color matches the slot color or the brush will not work normally.
Cleaning the Driving Wheels
15
EN
All manuals and user guides at all-guides.com
Push the buttons on
both sides of the suction
inlet at the same time.
Remove the Main Brush
Suction Option component.
1
Wipe the robot's suction
intake with a dry cloth.
3
Remove each Side Brush
by pressing the center
segment, then pulling the
brush out. Wipe the Side
Brush with a dry cloth.
Use the Multi-Function Cleaning Tool to remove any dust or hair tangled in the Driving
Wheels.
Clean Charging Dock
Unplug the Charging Dock.
Take out the Main Brush. Remove
hair and debris that may be
tangled around the Main Brush
with the Multi-Function Cleaning
Tool. Each row of bristles on the
2
Main Brush can also be removed
and cleaned separately.
After cleaning, reinstall Main
Brush and Main Brush Suction
Option component.
4
To replace, insert each Side
Brush into the slot with the
matching color. Press until you
hear a click.