BRAND Transferpette S-8 Instrucciones De Manejo página 45

5. Dispensing a sample
b.
c.
6. Ejecting a tip
The instrument should always be stored in the provided shelf mount or
table stand and kept in an upright position, without any tip inserted.
a.
Transferpette® S-8/-12 997208
a.
a.
Place the pipette tip against the ves-
sel wall. Hold the pipette at an angle
of 30-45° to the vessel wall.
b.
Press the pipetting knob at a steady
speed until it stops and hold it down.
To improve accuracy, comply with
the corresponding wait time for
serums, highly-viscous or low-density
media.
c.
Completely empty the tip by over-
stroking: Press the pipetting button
as far as it will go.
d.
While doing this, wipe the pipette tip
against the vessel wall.
e.
Remove the pipette tip from the ves-
sel wall and allow the pipetting but-
ton to move back to its original posi-
tion.
NOTICE
a.
Hold the pipette shaft over a suitable
disposal container and press the tip
eject button down as far as it will go.
Operating manual
45