BRAND Transferpette S-8 Instrucciones De Manejo página 53

Main components of the pipetting unit
A
B
C
Maintenance
In order to ensure proper functioning, the Transferpette® S -8/-12 should
be serviced at regular intervals and cleaned as necessary.
What must be checked?
a.
Check the pipette shafts, pistons and seals for damage and contami-
nation.
b.
Check the device for leaks. We recommend using BRAND's leak detec-
tor, the BRAND PLT unit. As an alternative to this, aspirate a sample
and hold the device vertically for approx. 10 s. If drops form on the
pipette tips, refer to "Troubleshooting" Troubleshooting, p. 58 .
Transferpette® S-8/-12 997208
A
Piston unit with piston support bar [ I ]
III
and inserted pistons, which can be indi-
vidually unscrewed for cleaning or re-
I placement.
B
Z
Shaft unit with shaft support bar [ II ] and
attached central guide axis (Z) as well as
II
the shafts and seals, which can be indi-
vidually unscrewed for cleaning and re-
placement.
C
Pipette housing, which is connected to
the pipette housing cover [ III ] of the pis-
ton unit using two turn-lock closures.
Operating manual
53