BRAND Transferpette electronic Instrucciones De Operación página 62

5 Pipetting programs
a.
3 x
b.
c.
1 x
d.
1 x
e.
f.
62
Operating manual
a.
Call up menu selection: Pressing the menu key three
times takes you to the program selection.
ð
'Mode' flashes.
b.
Set DISP mode: Use one of the arrow keys to scroll
through the modes until 'DISP' appears.
ð
'Mode' continues to flash.
c.
Confirm DISP mode: Press 'Enter' key.
ð
The display now shows 'blo' for blow-out.
d.
Preparing for pipetting: Press the pipetting key once to
move the piston to its start position.
ð
The arrow in the display points upwards (aspiration).
e.
Set partial volume: Pressing the arrow key (+\−) sets the
volume. Pressing and holding the arrow key causes the
volume to change quickly.
ð
'VOL' flashes.
f.
Confirm partial volume: Press 'Enter' key. The display
shows the newly set partial volume.
ð
'Steps' flashes. The maximum possible number of steps
is displayed.
Transferpette® electronic 997209