Monitor Operation; Using The Programming Menus; Main Menu Options - Honeywell E3Point Manual Del Usuario

Using the Programming Menus

The programming menus provide a series of options that let you
customize your gas detection system. Press the enter key to access the
programming menus. If no buttons are pressed for 2 minutes, the monitor
exits programming mode to normal operation.
CAUTION:
!
programming functions of this monitor. Factory settings conform to specific
standards. See Specifications. Any changes made to Alarm Levels may
affect manufacturer's stated standards compliance.

Main Menu Options

Each menu option provides access to further sub-menus. Consult the
following pages of this manual for menu use instructions.
Menu options do not apply to Remote model
Menu
Description
Options
Protects programming menus from
Password
unauthorized access.
Defines device address, baud rate, BACnet
Network ID, or communication protocol (Network
Model only).
Display Provides a choice of discrete display.
Defines whether the relays will be latched,
Relay
failsafe or activated.
Provides a choice between activated or
Buzzer
silenced.
Alarm Allows configuration of various alarm levels .
Temp Sets the maximum temperature level.
Restores the device's factory configured
Restore
calibration settings.
SetZero Sets the sensor zero.
SetSpan Calibrates the sensor span.
E Point Gas Monitor Technical Manual
3

Monitor Operation

Only qualified, knowledgeable personnel should use the
Monitor Operation
Menu Type
Shared menu
Model specific menu
*only for Network model
Shared menu
Model specific menu
Model specific menu
Model specific menu
Shared menu
Shared menu
Shared menu
Shared menu
17