EN
"Aroma" Function
The brewing time can be extended with the "Aroma" function. The extended brewing time will
give your coffee a more intense fl avour.
Touch the AROMA fi eld (15), the fi eld fl ashes. If the brewing process is then started, the fi eld
continues fl ashing and the "Added Flavour" function is switched on.
Please Note! The "Added Flavour" function switches off automatically after each brewing process.
Keep-Warm Function
The device has an automatic keep-warm function. The hotplate remains switched on for approx.
40 minutes after each brewing process.
If the keep-warm function is to be ended before this, touch the fi eld
Preparation
PLEASE NOTE!
•
The device should only be used if it has been correctly assembled! Before each use, check
whether the fi lter insert and the permanent fi lter are inserted correctly and whether the
water tank is fi lled correctly!
•
Do not operate the device without water. If this does happen, the device switches off
automatically. In this case, allow the device to cool down before water is poured in and the
device is used again.
•
Never use the device without a suitable jug below the coffee outlet.
1. Prepare the coffee machine (see the "Handling and Operation" chapter).
2. Touch the fi eld
(17) to start the brewing process. The operating fi elds go out, apart from
(and the fi eld AROMA (15), if activated). Hot water is poured over the coffee
the fi eld
powder to brew it.
After the end of the brewing process you will hear three beeps and all operating fi elds are
displayed again. The glass jug can then be removed.
To end the brewing process prematurely, touch the fi eld
The brewing process is aborted.
Making Coffee with a Preset Time
To make coffee with a preset time, the clock needs to be set (see the "Handling and Opera-
tion" chapter – "Time").
1. Prepare the coffee machine (see the previous chapter).
2. Touch the fi eld AUTO (16) for approx. 5 seconds, the time indicator (13) and the
tor (12) on the display fl ash.
(17).
again.
22
indica-