Next Level Racing Elite Serie Manual De Instrucciones página 11

support@nextlevelracing.com
TOP
BOTTOM
08
Install 1 x T-Nut into the top and bottom channel of the Overhead Cross Bar.
) )
A B
09 A) Align the holes on the Vesa Mounting Bracket with the threaded holes on the Small Vesa Plate.
B) Bolt through and secure with M8 Bolts and Washers.
ANGLE ADJUSTMENT RANGE
10
Loosen the bolts securing the Small Vesa Plate to the Vesa Mounting Bracket. Adjust to your desired
angle and tighten the bolts to lock in place.
PARTS:
• • 2 x T-NUTS
PARTS:
• • 1 x VESA MOUNTING BRACKET
• • 1 x SMALL VESA PLATE
• • 4 x M8 16mm BOLTS
• • 4 x M8 WASHERS
PARTS:
• • NIL
20
11 Align the Vesa assembly with T-Nuts previously installed in STEP 08. Bolt through and secure with M8
Bolts and Washers.
ANGLE ADJUSTMENT RANGE
12 Loosen the bolts securing the Overhead Uprights to the Overhead Angle Brackets. Adjust to your
desired angle and tighten the bolts to lock in place.
HEIGHT ADJUSTMENT RANGE
13
Loosen the bolts securing the Overhead Cross Bar to the Overhead Angle Arms. Adjust to your de-
sired height and tighten the bolts to lock in place.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 2 x M8 16mm BOLTS
• • 2 x M8 WASHERS
PARTS:
• • NIL
PARTS:
• • NIL
21