support@nextlevelracing.com
PRE-RACE
CHECKS
WARNING
•
Please do not use power tools for assembly as over tightening can damage parts.
•
If in doubt consult the installation video or contact us on support@nextlevelracing.com
•
T-Nuts can not be installed mid channel. Must be installed from the ends of extrusion.
•
Plan the placement of cable management clips at the start of your build.
•
Please ensure T-Nuts are correctly placed within the extrusion.
•
Lay out and build on a level surface.
•
Do not hang additional loads on monitor stand.
•
Beware of sharp edges on extrusion pieces.
•
Do not force parts together.
•
Avoid cross threading bolts.
If you require any support with your product please contact our friendly
team at: support@nextlevelracing.com
ALUMINIUM EXTRUSION TIPS
•
Please do not use power tools for assembly as over tightening can damage your frame.
•
Please ensure T-Nuts are correctly placed within the extrusion.
•
Beware of sharp edges on the extrusion pieces.
•
Do not force parts together.
•
Avoid cross threading bolts.
WARNING
CHOKING HAZARD - Small parts not for children under 3 years
or any individuals who have a tendency to place inedible objects
in their mouths.
ASSEMBLY
VIDEO
bit.ly/nlrbuild
4
IN THE
BOX
*NOT TO SCALE
SINGLE DIRECT
MONITOR STAND
NOTE: Some Items Come with Rust Resistant Coating
2 x MOUNTING PLATES
4 x UPRIGHT MOUNTING BRACKETS
2 x CORNER BRACKETS
1 x VESA MOUNTING BRACKET
5 x END CAPS (40 x 40)
3 x END CAPS (40 x 80)
4 x 16mm COUNTERSUNK BOLTS
4 x M4 15mm BOLTS
4 x M5 15mm BOLTS
4 x M6 15mm BOLTS
SPANNER WRENCH
44 x M8 16mm BOLTS
38 x FULL WIDTH T-NUTS
8 x REGULAR T-NUTS
Video Instruction: bit.ly/nlrbuild
)
(
L
R
OUTRIGGER ARMS
MAIN CROSS BAR
)
L
1 x LARGE VESA PLATE
1 x SMALL VESA PLATE
MAIN UPRIGHTS
3 x END CAPS (40 x 80 ANGLED)
4 x CABLE CLIPS
4 x M4 15mm BOLTS
4 x M5 15mm BOLTS
2 x M8 40mm BOLTS
4 x M6 15mm BOLTS
2 x M8 60mm BOLTS
38 x M8 16mm BOLTS
2 x M8 FLANGE NUTS
4 x M6 FLANGE NUTS
ALLEN KEYS
5
(
R