storchenmuhle NIKI START Manual Del Usuario página 23

Support leg
• Fold out the support leg underneath the
child car seat and slide it into the front slot.
Ensure that the support leg is properly en-
gaged in the front slot. For children under
105 cm in height, the child car seat may
only be used with the Isofix support leg
folded out together with the Isofix connec-
tors. Using the child car seat only with Isofix
connectors is not permitted.
• Pull up the support leg height adjustment
knob and extend the telescopic support
leg. Make sure that this is fully in contact
with the footwell of your vehicle.
• Ensure that the indicator on the support leg
is showing green.
Isofix connectors
• Push the insertion aids through the slit in
the cushion between the backrest and seat
into the Isofix holders.
• When doing this, the flat side of the insertion
aids must be facing downwards. This step
is not necessary if the vehicle already has
fixed insertion aids.
• Press the two lateral Isofix connector but-
tons in order to extend the length of the
Isofix connectors.
• Push the Isofix connectors into the insertion
aids until you hear them click into place.
• Push the child car seat in until it rests
securely against the backrest of the car
seat. Ensure that both Isofix indicators are
switched to green.
- 23 - EN