storchenmuhle NIKI START Manual Del Usuario página 25

INSTALLATION OF THE CHILD CAR SEAT
1) Size class 40–105 cm, max. 18 kg, rear-facing
1 . Set the age of your child on the RotationControl knob.
2 . Set the child car seat to the maximum reclining position and turn it until it is in
rear-facing seat position R.
3 . Press the two lateral Isofix connector buttons to extend the Isofix connectors.
4 . Fold out the support leg as described above.
5 . Guide the Isofix connectors onto the Isofix holders on the seat of the vehicle
and ensure that they lock in position.
6 . Push the child car seat in until it rests securely against the backrest of the car
seat. Ensure that both Isofix indicators are showing green.
7 . Adjust the height of the support leg and ensure that this is fully in contact with
the footwell of your vehicle.
8 . Ensure that the indicator on the support leg is switched to green.
9 . When placing your child in the child car seat, turn the car seat towards the car
door for convenience.
10 . Unfasten the belt buckle on the child car seat and place the belts on the outside
of the seat.
11 . Put your child in the child car seat.
12 . Adjust the height of the head support as described above.
13 . Fasten the belt buckle again until you hear a click.
14 . Pull the front adjustment strap to tighten the belts. Ensure that the straps are
not twisted.
15 . Turn the seat into the rear-facing position. Check that the child car seat is
locked in this position.
- 25 - EN