Recorder Settings; Profile Management; About - Sunoptic Surgical HDC-300 Manual De Instrucciones

5.6.4

Recorder Settings

The Recorder Settings menu invokes the recorder main menu. The user must be
connected to an external monitor to view this menu. Settings such as On-Screen Display,
recorder image quality, etc. can be changed in this menu.
The Recorder Settings menu also has a format HDD option. From the on-screen Main
Menu, navigate to "Advanced." In this submenu, there will be an action titled "Format
Recording Device." Press the enter icon to select the action and use the arrow icons to
navigate to the desired device you wish to format. Confirm the selection by pressing the
enter icon again.
5.6.5

Profile Management

Profile Management provides users a method of saving or recalling settings such as zoom
level or image brightness. Pressing the Save Profile icon will save all user adjustable
settings. Pressing the Factory Defaults icon will reset all settings to the default values.
NOTE: the camera console will start with the last active profile.

5.6.6 About

The About menu displays the software and firmware versions of the camera console
and allows a user to reset the device to factory default settings by pressing the
factory reset icon. Additionally, if a USB flash drive loaded with the appropriate
software is connected to the center-most rear USB port, the user may perform a
software update.
LIT- 248 SUNOPTIC SURGICAL
Rev. D
®
Page 17 of 189
(English)