Description Of The Functions And Their Operation; Stopwatch With Split Function (Chrono) - Junghans Mega 1000 Instrucciones De Uso

5. Description of the functions and their operation

5.1 Stopwatch with split function (chrono)

T4 T1
Press T3 until CHRONO mode is selected. The display
shows hours, minutes, seconds, tenths of a second
and hundredths of a second.
T5
T3 T2
T4 T4 T1 T1
T4 is used to start and to stop the stopwatch. When
the stopwatch is running the tag "ON" appears
above the CHRONO menu item.
T5
T3 T3 T2 T2
T4 T1
Pressing T1 resets the counter to 00:00:00.00 and
erases any split times that have been saved. The
stopwatch can only be reset if it is not running.
T5
T3 T2
50
All manuals and user guides at all-guides.com
T4 T1
When the stopwatch is running, pressing T2 shows
the split time. These are shown in the upper part of
the display. Pressing T2 again shows additional split
times. The last ten split times are always saved. The
T5
stopwatch continues to run when split times are
being shown.
T3 T2
T4 T1
After pressing T4 to stop the stopwatch, the split
times that were saved can be shown by pressing T2.
T5
T3 T2
51