Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 6. Use
Global Seal Time:
To set the "default" sealing time depending on the type of pouch used.
The set time is applied to all the recipes.
A time of between 0.1 and 4.0 s can be set. The default time is 1.1 s.
Oil Cleaning:
To run a cycle for cleaning the oil in the pump.
All Memory Clear:
To clear the recipes saved in the
Touch sound:
To activate/deactivate the sound by touching a key on the display.
Screensaver Setting:
Enables/disables the screensaver.
When active, it allows you to choose the image that appears on the display.
Import / Export:
To import/export the recipes using a USB flash drive.
It is used to set an alarm. When activated, the "Home page" displays the
Vac timer:
Press
.
Quick Vac:
Allows you to quickly run a vacuum cycle directly from the "Home page" (the cycle has standard
parameters, which cannot be changed). When activated, the "Home page" displays the
Press
.
Pre-heating:
This feature must be activated if the appliance operates in a very cold environment.
Every time the appliance is started, the pump starts in order to guarantee optimal oil temperature
in the pump and to warm up, ready for the first packaging cycle.
"Mine" menu.
Press the
and
buttons to set the time (minutes).
Press the "Start" button to start the count.
An acoustic signal is emitted at the end of the programmed time.
Press
.
46
20/7
button.
Press
to start the
vacuum cycle.
EN
button.
Publicidad
Tabla de contenido
