Cleaning The Device; Technical Data; Technical Specifications - SICK CSM Instrucciones De Uso

OPERATING INSTRUCTIONS
9.2

Cleaning the device

en
10

Technical data

10.1

Technical specifications

40 O P E R A T I N G I N S T R U C T I O N S | CSM
Maintenance work
Check screw connections and plug
connectors
At regular intervals (e.g., weekly), check the light emission window and the housing of
the device for dirt. This is especially relevant in harsh operating environments (dust,
abrasion, damp, fingerprints, etc.). The lens of the light emission window must be kept
clean and dry during operation.
NOTICE
Device damage due to improper cleaning!
Improper cleaning may result in device damage.
Only use suitable cleaning agents.
■
Never use sharp objects for cleaning.
■
Cleaning the light emission window
NOTICE
Damage to the light emission window!
Reduced reading performance due to scratches or streaks on the light emission win‐
dow!
Clean the light emission window only when wet.
b
Use a mild cleaning agent that does not contain powder additives. Do not use
b
aggressive cleaning agents, such as acetone, etc.
Avoid any movements that could cause scratches or abrasions on the light emis‐
b
sion window.
Only use cleaning agents suitable for the lens material.
b
NOTE
Static charge may cause dust particles to stick to the light emission window. This effect
can be avoided by using an anti-static glass cleaner in combination with the SICK lens
cloth (can be obtained from www.sick.com).
NOTE
If the light emission window is scratched or damaged (cracked or broken), the device
must be replaced. Contact SICK Service to arrange this.
Cleaning the housing
In order to ensure that the heat produced by the internal power loss is adequately
dissipated, the housing surface must be kept clean.
The "Technical Data" chapter contains only an extract of the technical data of the
sensor.
The complete technical data can be found on the homepage
part number of the sensor.
Interval
Every 6 months
www.sick.com
Implementation
Specialist
under the
8027352/2022-05-19 | SICK
Subject to change without notice