Mounting Requirements - SICK CSM Instrucciones De Uso

4 Mounting
4.1 Scope of delivery
4.2

Mounting requirements

8027352/2022-05-19 | SICK
Subject to change without notice
Table 2: Types of emitted light
Teach-in
1-point-teach
Dynamic teach
NOTE
30s
Activation and deactivation: hold down teach-in button > 30 s.
Yellow LED will blink continuously when holding down teach-in button during the 30 sec‐
onds and off when lock is activated. When locked, the yellow indicator will not lit even
when teach-in button is pressed. To unlock, press teach in button for 30 seconds.
• Sensor in the version ordered
• Quickstart
•
Safety notes
• Typical space requirement for the device, see type-specific dimensional drawing,
see "Technical data", page
• Comply with technical data, such as the permitted ambient conditions for opera‐
tion of the device (e.g., temperature range, EMC interference emissions, ground
potential).
• To prevent condensation, avoid exposing the device to rapid changes in tempera‐
ture.
• Protect the device from direct sunlight.
• The device must only be mounted using the pairs of mounting threads/fixing holes
provided for this purpose.
• Shock and vibration-free mounting.
OPERATING INSTRUCTIONS
Tolerance
middle
coarse
fine
coarse
40.
O P E R A T I N G I N S T R U C T I O N S | CSM
Emitted light
green
red
blue
red
en
31