Recommended Accessories - SICK CSM Instrucciones De Uso

OPERATING INSTRUCTIONS
10.3 Process data structure
en
10.4

Recommended accessories

46 O P E R A T I N G I N S T R U C T I O N S | CSM
CSM
IO-Link
Vendor ID
Device ID HEX
Device ID DEC
Cycle time
Process data
Process data structure A
Process data structure B
Suitable connector to be used together with the CSM (connector variants) is connector
cable with M8 connector, female, 4-pin.
Example of recommended connector cable is:
Table 8: Cable with M8 connector, female, 4-pin
Male connectors and cables
Head A: female connector, M8, 4-pin, straight, A-coded
Head B: Flying leads
Cable: Sensor/actuator cable, PVC, unshielded, 5 m
Suitable connector to be used together with the CSM (pigtail M12 connector variants) is
connector cable with M12 connector, female, 4-pin.
Example of recommended connector cable is:
Table 9: Cable with M12 connector, female, 4-pin
Male connectors and cables
Head A: female connector, M12, 4-pin, straight, A-coded
Head B: Flying leads
Cable: Sensor/actuator cable, PVC, unshielded, 5 m
These are only examples and recommendations. Please refer to the SICK website for
more connector cable options.
A00
V1.1
26
800071
8388721
2.3 ms
16 Bit
Bit 0 = switching signal QL1
Bit 1 = switching signal QL2
Bit 2 = Quality of Run Alarm
Bit 3 ... 5 = Emission Color
Bit 6 ... 15 = Measurment Value RGB
Bit 0 = switching signal QL1
Bit 1 = switching signal QL2
Bit 2 = switching signal QL3
Bit 3 = switching signal QL4
Bit 4 = switching signal QL5
Bit 5 = switching signal QL6
Bit 6 = switching signal QL7
Bit 7 = switching signal QL8
Bit 9 ... 15 = empty
YF8U14-0
50VA3XLE
AX
YF2A14-0
50VB3XLE
AX
8027352/2022-05-19 | SICK
Subject to change without notice
2095889
2096235