Micro Sd Card Installation; Td52Xw Rear Housing Orientation; Mounting Bracket - OHAUS TD52XW Manual De Instrucciones

EN-14 Defender 5000 Indicators

2.3.4 MICRO SD Card Installation

The SD memory card can be used for additional storage in the Checkweighing and Counting
applications. Figure 2-5 shows the installation of an SD card into the socket on the edge of the TD52P
and TD52XW main boards.
Figure 2-5 Sliding an SD Card into the SD Socket (left); SD Card Installed (right)

2.4 TD52XW Rear Housing Orientation

The TD52XW is delivered in the wall mount orientation with the connections exiting below the display.
The rear housing may be reversed so the connections exit above the display when the TD52XW is
placed horizontally on a bench. To reverse the rear housing, remove the four Phillips head screws,
carefully rotate the housing 180° , and reinstall the screws.
Figure 2-6 Wall Mount Configuration Figure 2-7 Bench Top Configuration

2.5 Mounting Bracket

Attach the bracket to a wall or table using fasteners (not supplied) that are appropriate for the type of
mounting surface. The bracket will accommodate up to 6 mm (1/4") diameter screws. Locate the
mounting holes as shown in Figure 2-8.
GlobalTestSupply
Figure 2-8 Mounting Bracket Dimensions
www. .com
Find Quality Products Online at: sales@GlobalTestSupply.com