Descargar Imprimir esta página

Connecting To A Computer; Connecting To A Serial Printer; Printouts; Defender 5000 Indicators - OHAUS TD52XW Manual De Instrucciones

Defender 5000 indicadores
Ocultar thumbs Ver también para TD52XW:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Defender 5000 Indicators

Pin 5: Ground signal (GND)
Pin 7: Clear to send (hardware handshake) (CTS)
Pin 8: Request to send (hardware handshake) (RTS)
Use the built-in RS-232 Port to connect either to a computer or a printer

5.3 Connecting to a Computer

Connect to the computer with a standard (straight-through) serial cable.
Use HyperTerminal or similar terminal software to test communication with the computer.
Set up HyperTerminal as follows:
Choose New Connection, "connect using" COM1 (or available COM port).
Select Baud=9600; Parity=8 None; Stop=1; Handshaking=None. Click OK.
Choose Properties/Settings, then ASCII Setup. Check boxes as illustrated:
(Send line ends...; Echo typed characters...; Wrap lines...)
Verify communication by pressing the Print button. If HyperTerminal is set up properly, the value on
the display will be displayed in the window.

5.4 Connecting to a Serial Printer

Connect the cable supplied with the printer to the scale's RS-232 port.
Make sure that the indicator and printer communication settings match.
Test communication with the printer by pressing the Print button. If the indicator and printer are set
up properly, the value on the display will be printed.

5.5 Printouts

Printout string for g, kg, lb, oz units:
Check Weighing application:
Field
Weight
(Right
aligned)
Length
11
Non-Check Weighing application:
Field
Length
Each field is followed by a single delimiting space (ASCII: 32).
Definitions:
Weight - Up to 11 characters, right justified, - at immediate left of most significant character (if
negative).
Unit
- Up to 5 characters, right justified. If the Unit in the Print Content menu was set to OFF, the
unit will be removed in the weight string and replaced by spaces.
Stability - "?" character is printed if not stable. If weight is a space is printed.
Find Quality Products Online at:
Space Unit
Space Stability
(Right
aligned)
1
5
1
Weight
Space
Unit
(Right
(Right
aligned)
aligned)
11
1
5
GlobalTestSupply
www.
Space T/N/G/PT
(?)
(Right
aligned)
1
1
2
Space
Stability
Space
(?)
1
1
1
Space Application
Term.
Status
(Right aligned)
1
6
2
T/N/G/PT
Term.
(Right aligned)
2
2
.com
sales@GlobalTestSupply.com
EN-55

Publicidad

Solución de problemas

loading

Este manual también es adecuado para:

Td52p