Maintenance; Maintenance Chart - Snapper RPX200 Manual Del Operario

Maintenance

Maintenance Chart

TRACTOR AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check tire pressure
Check mower blade stopping time
Check tractor and mower for loose hardware
Every 50 Hours or Annually *
Clean battery and cables
Check tractor brakes
See Dealer Annually to
Lubricate tractor and mower
Check mower blades **
* Whichever comes first
** Check blades more often in regions with sandy soils or high dust
conditions.
WARNING
Unintentional sparking can result in fire or electric shock.
Unintentional start-up can result in entanglement,
traumatic amputation, or laceration.
Before performing adjustments or repairs:
• Disconnect the spark plug wire and keep it away from
the spark plug.
• Disconnect battery at negative terminal (only engines
with electric start).
• Use only correct tools.
• Do not tamper with governor spring, links, or other
parts to increase engine speed.
• Replacement parts must be of the same design and
installed in the same position as the original parts.
Other parts may not perform as well, may damage the
unit, and may result in injury.
• Do not strike the flywheel with a hammer or hard object
because the flywheel may shatter during operation.
Check Tire Pressure
Tires should be checked periodically to provide the
optimum traction and to guarantee the best cut (see Figure
7).
NOTE: These pressures may differ slightly from the
"Maximum Inflation" stamped on the side walls of the tires.
20
All manuals and user guides at all-guides.com
ENGINE
First 5 Hours
Every 8 Hours or Daily
Every 25 Hours or Annually *
Every 50 Hours or Annually *
Annually
See Dealer Annually to
*
** Clean more often in dusty conditions or when airborne debris is present.
Check Tire Pressure
Tires should be checked periodically to provide the
optimum traction and to guarantee the best cut (see Figure
4).
NOTE: These pressures may differ slightly from the
"Maximum Inflation" stamped on the side walls of the tires.
ride.
Check Mower Blade Stopping Time
Mower blades and mower drive belt should come to a
complete stop within five seconds after the electric PTO
switch is turned off.
1. With tractor in neutral, PTO disengaged and operator in
2. Engage the PTO and wait several seconds. Disengage
3. If mower drive belt does not stop within five seconds,
Change engine oil
Check engine oil level
Clean engine air filter and pre-cleaner **
Change engine oil
Replace oil filter
Replace air filter
Replace pre-cleaner
Inspect muffler and spark arrester
Replace spark plug
Replace fuel filter
Clean engine air cooling system
Whichever comes first
seat, start the engine.
the PTO.
see an authorized dealer.