Specifications - Snapper RPX200 Manual Del Operario

Specifications

ENGINES
Model 4195 Series Intek
Displacement 500 cc (30,5 cu in.)
Electrical System Battery: 12 Volt, 195 CCA
Alternator: 9 amp
Oil Capacity 1,4 L (48 oz)
Model 7200 Series Intek
Displacement 656 cc (40,03 cu in.)
Electrical System Battery: 12 Volt, 195 CCA
Alternator: 9 amp reg.
Oil Capacity 1,9 L (64 oz)
Model 7220 Series Intek
Displacement 656 cc (40,03 cu in.)
Electrical System Battery: 12 Volt, 195 CCA
Alternator: 9 amp reg.
Oil Capacity 1,9 L (64 oz)
Model Professional Series
Displacement 724 cc (44,18 cu in.)
Electrical System Battery: 12 Volt, 195 CCA
Alternator: 9 amp reg.
Oil Capacity 1,9 L (64 oz)
All Models
Spark Plug Gap 0,76 mm (0.030 in.)
Spark Plug Torque 20 Nm (180 in-lbs)
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995.
Torque values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others;
horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.
COM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are collected without
these attachments. Actual gross engine power will be higher than net engine power and is affected by, among other things,
ambient operating conditions and engine-to-engine variability. Given the wide array of products on which engines are
placed, the gasoline engine may not develop the rated gross power when used in a given piece of power equipment. This
difference is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity,
altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute
an engine of higher rated power for this engine.
Parts and Accessories
Contact an authorized dealer.
26
All manuals and user guides at all-guides.com
CHASSIS
Fuel Tank Capacity
Front Wheels
TM
Rear Wheels
TM
TRANSMISSION
Type
Engine Oil
MOWER
TM
Width of Cut
Number of Blades
Base Deck Platform
Cutting Height
Cutting Positions
TM
11,25 L (2,97 gal)
Tire Size: 15 x 6.0
Inflation Pressure: 14 psi (0,96 bar)
Tire Size: 20 x 8,0
Inflation Pressure: 10 psi (0,68 bar)
Tire Size: 22 x 9,5
Inflation Pressure: 10 psi (0,68 bar)
Hydro Gear
Synthetic 5W30
96,5 cm (38")
106,7 cm (42")
2
Rear Discharge
3,8-8,9 cm (1,5-3,5")
6
®
610