Recommendations; Liabilities; User's Liability; Installer's Liability - De Dietrich INIDENS 24 Manual De Usuario

en
1 Safety
1.2

Recommendations

Warning
Installation and maintenance of the boiler must be carried out by a qualified installer in accordance with local and
national regulations.
Warning
Removal and disposal of the boiler must be carried out by a qualified installer in accordance with local and national
regulations.
Danger
For safety reasons, we recommend fitting smoke and CO alarms at suitable places in your home.
Caution
Make sure the boiler can be reached at all times.
The boiler must be installed in a frost-free area.
If the power cord is permanently connected, you must always install a main bipolar switch with an opening gap of
at least 3 mm (EN 60335-1).
Drain the boiler and central heating system if you are not going to use your home for a long time and there is a
chance of frost.
The frost protection does not work if the boiler is out of operation.
The boiler protection only protects the boiler, not the system.
Check the water pressure in the system regularly. If the water pressure is lower than 0.8 bar, the system must be
topped up (recommended water pressure between 1.5 and 2 bar).
Important
Keep this document near to the boiler.
Important
Instruction and warning labels must never be removed or covered and must be clearly legible throughout the entire
service life of the boiler. Damaged or illegible instructions and warning stickers must be replaced immediately.
Important
Modifications to the boiler require the written approval of De Dietrich
Danger
All of the various packaging components (plastic bags, polystyrene, etc.) must be kept out of the reach of children
as they are potentially dangerous.
1.3

Liabilities

1.3.1

User's liability

To guarantee optimum operation of the system, you must abide by the following instructions:
Read and follow the instructions given in the manuals provided with the appliance.
Contact a qualified professional to carry out installation and initial commissioning.
Contact a qualified professional to carry out installation and initial commissioning.
Ask your installer to explain your installation to you.
Have the required inspections and maintenance carried out by a qualified installer.
Have the required inspections and maintenance carried out by a qualified installer.
Keep the instruction manuals in good condition close to the appliance.
1.3.2

Installer's liability

The installer is responsible for the installation and initial commissioning of the appliance. The installer must respect the following
instructions:
Read and follow the instructions given in the manuals provided with the appliance.
Install the appliance in accordance with prevailing legislation and standards.
Carry out initial commissioning and any checks necessary.
Explain the installation to the user.
If maintenance is necessary, warn the user of the obligation to check the appliance and keep it in good working order.
Give all the instruction manuals to the user.
50 INIDENS 7804840 - 02 - 20012022