Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
select
microphone (3) to
5. Press the AM/FM key (7) to
channel blinks on the display.
6. Use s/t key (3) on the unit or UP/DN key (3) on the
microphone to
select
7. Press the AM/FM key (7) to
modulation mode (AM or FM) blinks on the display.
8. Use s/t key (3) on the unit or UP/DN key (3) on the
select
microphone to
9. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
10. The unit automatically
See the § EMG page 46
See then Table page 74 for default emergency chan-
nels.
5) MIC TYPE
The BILL II accepts 6-pin PRESIDENT electret or dynamic
microphone.
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
select
4. Press the AM/FM key (7) to validate.
5. Use s/t key (3) on the unit or UP/DN key (3) on the
alternate
microphone to
(Dynamic).
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
(the "2" blinks).
validate
or
the channel.
validate
the channel. The
the modulation mode.
confirm
and
select
another
confirm
and exit.
exits
the menu after 10 seconds.
the
menu.
between EL (electret) or dY
confirm
and
select
another
confirm
and exit.
exits
the menu after 10 seconds.
Note: On power up, in order to inform the user, the pro-
. The
grammed microphone type is displayed for 2 seconds
(see § ON/OFF page 43).
The default type of microphone is EL.
6) ACCESSORY VOLUME
This function allows you to control the volume of the unit
and an accessory plugged on the 6-pin plug (accessory
available soon).
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
4. Press the AM/FM key (7) to validate.
5. Use s/t key (3) on the unit or UP/DN key (3) on the
microphone to
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
is
0 - the volume knob (1) affects the internal speaker volume.
1 - the volume knob (1) affect the accessory volume
2 - the volume knob (1) affects both the internal speaker
and accessory volume.
Default accessory volume is 0.
7) SCAN SKIP
This function allows to
the SCAN SKIP memory.
Select
First
then channel to be set.
49
select
the
menu.
select
0, 1 or 2.
confirm
and
select
confirm
exits
the menu after 10 seconds.
memorize/erase
a channel form
is
another
and exit.
Publicidad
Tabla de contenido
