Technical Characteristics - PRESIDENT BILL II Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
select
4. Press the AM/FM key (7) to
5. Use s/t key (3) on the unit or UP/DN key (3) on the
microphone to
alternate
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
On memorize the current channel into the SCAN SKIP
memory. When a channel is stored in the memory,
blink alternatively with the frequency band.
OF erase the current channel from the SCAN SKIP memory,
disappears from the display. See the § SKIP on page
45.
Consult the RESET menu.
8) RESET
Erase
the scan skip memory or
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
select
microphone (3) to
4. Press the AM/FM key (7) to validate.
5. Use s/t key (3) on the unit or UP/DN key (3) on the
microphone to
Select
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
the
menu.
validate
the menu.
between On and OF.
confirm
select
and
another
confirm
and exit.
exits
the menu after 10 seconds.
restore
all factory settings.
the menu
.
SC or AL.
confirm
and
select
another
confirm
and exit.
7. The unit automatically
is
SC erase all the channels stored on the SCAN SKIP memory.
They are now enabled to be scanned (see the § SKIP
page 45).
AL restore all the factory parameters.
A) DC-POWER TERMINAL (13,2 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL SPEAKER JACK (8 Ω, Ø 3,5 mm)
F) TECHNICAL CHARACTERISTICS
1) GENERAL
- Channels
- Modulation modes
- Frequency ranges
- Antenna impedance
- Power supply
- Dimensions (in mm)
- Weight
- Accessories supplied
is
2) TRANSMISSION
- Frequency allowance
- Carrier power
- Transmission interference
- Audio response
- Emitted power in the adj.
channel
50
exits
the menu after 10 seconds.
: 40
: AM/FM
: from 26.965 MHz to 27.405 MHz
: 50 ohms
: 13.2 V
: 102 (L) x 100 (H) x 25 (D)
: ± 0.320 kg
: Electret microphone with
support, mounting cradle,
quick fixation clip, screws.
: +/- 200 Hz
: 4 W AM / 4 W FM
: inferior to 4 nW (- 54 dBm)
: 300 Hz to 3 KHz in AM/FM
: inferior to 20 µW

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Txpr101

Tabla de contenido