Technical Data - REMS Ax-Press 25 22 V ACC Instrucciones De Servicio

eng
● Never let the power tool operate unattended. Switch off the power tool
during longer work breaks, pull out the mains plug/battery. Electrical devices
can cause hazards which lead to material damage or injury when left unattended.
● Check the power cable, extension leads of the power tool and the power
supply regularly for damage. Have these renewed by qualifi ed experts or an
authorised REMS customer service workshop in case of damage.
● Only allow trained persons to use the power tool. Apprentices may only use
the power tool when they are over 16, when this is necessary for their training
and when they are supervised by a trained operative.
● Children and persons who, due to their physical, sensory or mental abilities
or lack of experience and knowledge are unable to operate the power tool
safely may not use this power tool without supervision or instruction by a
responsible person. Otherwise there is a risk of injury due to false operation.
● Only use approved and appropriately marked extension leads with a suffi -
cient cable cross-section. Use extension leads up to a length of 10 m with
cable cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm².
Safety notes for batteries, rapid chargers,
power supply units
WARNING WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided
with this power tool. Failure to heed the instructions can result in electric shock,
fi re and/or severe injuries.
Save all warnings and instructions for future reference.
See also www.rems.de → Downloads → Operating Instructions and
www.rems.de → Downloads → Safety Data Sheets → Batteries.
Explanation of symbols
WARNING WARNING Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE
Material damage, no safety note! No danger of injury.
Do not reach inside
Read the operating manual before starting
Use eye protection
Use ear protection
Electrical device complies with protection class II
Not suitable for using outdoors
Switched-mode power supply (SMPS)
Short-circuit-proof safety transformer (SCPST)
Environmental friendly disposal
CE conformity mark

1. Technical Data

Intended use
WARNING WARNING
REMS cordless axial presses are intended for the purpose of making compression
sleeve connections.
REMS pipe expanders are intended for the purpose of expanding and calibrating pipes.
REMS batteries, rapid chargers, power supply units are intended for use in accord-
ance with the guidelines for use (fi g. 5).
All other uses are not for the intended purpose and are prohibited.
1.1. Scope of Supply
REMS Power-Ex-Press P-CEF ACC: Drive unit, operating instructions, steel case
Cordless axial presses/pipe expanders: Drive unit, Li-Ion battery, rapid charger,
operating instructions, steel case
1.2. Article numbers
REMS Ax-Press 25 22 V ACC drive unit
REMS Ax-Press 25 L 22 V ACC drive unit
REMS Ax-Press 30 22 V drive unit
REMS Ex-Press 22 V ACC drive unit
REMS Power-Ex-Press P-CEF ACC drive unit
Expander device Cu (REMS Ex-Press 22 V ACC)
Expander device P (REMS Ex-Press 22 V ACC)
Expander device P-CEF (REMS Ex-Press 22 V ACC)
Expanding device 16 – 40 mm, ½ – 1½"
(REMS Power-Ex-Press P-CEF ACC)
Expanding device 50 – 63 mm, 2"
(REMS Power-Ex-Press P-CEF ACC)
REMS battery Li-Ion 21.6 V, 1.5 Ah
REMS battery Li-Ion 21.6 V, 2.5 Ah
REMS battery Li-Ion 21.6 V, 5.0 Ah
REMS battery Li-Ion 21.6 V, 9.0 Ah
Rapid charger Li-Ion 220 – 240 V, 70 W
Rapid charger Li-Ion 100 – 240 V, 90 W
Rapid charger Li-Ion 100 – 240 V, 290 W
Voltage supply 220 – 240 V, instead of 21.6 V, 15 A batteries
Voltage supply 220 – 240 V, instead of 21.6 V, 40 A batteries
Sheet steel case, REMS Ax-Press 25 22 V ACC /
Ax-Press 25 L 22 V ACC
Sheet steel case, REMS Ax-Press 30 22 V
Sheet steel case, REMS Ex-Press 22 V ACC
Sheet steel case, REMS Power-Ex-Press P-CEF ACC
REMS CleanM, Machine cleaner Machine cleaner Machine cleaner
1.3. Capacity
REMS Ax-Press 25 22 V ACC / 25 L 22 V ACC
axial press for making compression sleeve joints
(sliding sleeve joints) on plastic pipes, composite pipes
See also www.rems.de → Products → Axial Presses →
REMS pressing heads → Catalogue excerpt (PDF)
REMS Ax-Press 30 22 V
axial press for making compression sleeve joints
(sliding sleeve joints) with pinch sleeve on plastic pipes,
composite pipes
See also www.rems.de → Products → Axial Presses →
REMS Ax-Press 30 22 V → Catalogue excerpt (PDF)
REMS Ex-Press 22 V ACC
cordless pipe expander with Cu expander for expanding cordless pipe expander with Cu expander cordless pipe expander with Cu expander for expanding
and calibrating soft copper pipes s ≤ 1.5 mm, soft aluminium
pipes s ≤ 1.2 mm, soft precision steel pipes s ≤ 1.2 mm,
soft stainless-steel pipes s ≤ 1 mm
See also www.rems.de → Products → Expanding, Necking →
REMS Cu expanding heads → Catalogue excerpt (PDF)
REMS Ex-Press 22 V ACC
cordless pipe expander with P expander
for expanding plastic pipes, composite pipes
See also www.rems.de → Products → Expanding, Necking →
REMS P expanding heads → Catalogue excerpt (PDF)
REMS Ex-Press 22 V ACC
cordless pipe expander with P-CEF expander for
expanding plastic Cold Expansions Fittings (P-CEF)
See also www.rems.de → Products → Expanding, Necking →
REMS P-CEF expanding heads → Catalogue excerpt (PDF)
573020
573021
573008
575010
575007
eng
575252
575253
575256
575100
575101
571570
571571
571581
571583
571575
571585
571587
571567
571578
578290
573282
578290
575278
140119 140119
Ø 12 – 40 mm
Ø 12 – 32 mm
Ø 8 – 42 mm
Ø ⅜ – 1¾"
Ø 12 – 40 mm
Ø 16 – 40 mm
Ø ½ – 1½"
s ≤ 4.95 mm
11