Special Safety Instructions - Rothenberger SUPERTRONIC 2000 E Instrucciones De Uso

a) Recharge only with the charger specified by the manufacturer. A charger that is suita-
ble for one type of battery pack may create a risk of fire when used with another battery
pack.
b)
WARNING! Use power tools only with specifically designated battery packs
and respectively battery types. Use of any other battery packs may create a risk
of explosions, injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a connec-
tion from one terminal to another. Shorting the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a damaged or modified battery. Damaged or modified batteries can behave
unexpectedly and lead to fires, explosions or injuries.
f) Do not expose a battery for fire or high temperatures. Fire or temperatures above 130°C
(265°F) can cause an explosion.
g) Follow all the instructions for charging and never charge the battery or the cordless
tool outside the temperature range specified in the operating instructions. Incorrect
charging or charging outside the permitted temperature range can destroy the battery and
increase the fire risk.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical re-
placement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged batteries. All maintenance of batteries should only be carried out
by the manufacturer or authorised customer service points.
1.3

Special safety instructions

SUPERTRONIC 2000 E:
Do not thread without using the tube clamp. The tube clamp should be used even when thread-
ing the smallest sizes.
Check that the tube clamp is perfectly mounted. If the tube is not fastened correctly, the machine
would rotate on the threading head, with the consequent risk of injury to the operator. The tube
fastening bolt is left loose inside the case cover and should be screwed into its corresponding
hole.
Check condition of ON switch. When released of pressure, check that the ON switch unblocks
automatically.
Do not thread without abundant and continuous lubrication. Good lubrication will prolong the life
of your machine and threading heads. It will also improve threading quality.
Always thread at working speed. Threading from right to left should be done at the working
speed indicated on the reversing gear lever in the direction of the arrow. Fast speed will only be
used to unscrew the threading head from the tube. For left thread, insert the threading head at
the opposite end of the machine and maintain rotation in work direction.
Do not change speeds during the threading operation. When the threading operation has been
completed, stop the machine and change gears to initiate reverse movement and free the tube.
Verw enden Si e immer die mit
Always use i t with
Always use the support device supplied with the power tool. Losing control whilst working
might result in injuries.
Keep your sleeves and jackets buttoned up whilst handling the power tool. Do not reach
over the power tool or the pipe. Clothing can get caught by the pipe or the power tool and
then you will be entangled.
Only one person is to control the work process and handle the power tool. Allowing addi-
tional personnel to become involved in the work process might result in unintentional actions and
injuries.
ENGLISH 15