Teka HLB 85-G1 P BM Manual Del Usuario página 140

the screen and press
displayed on the screen.
2. Select the cooking time, by pressing
. Next, two beeps are heard, the remain-
ing time appears on the display and symbol
flashes slowly.
3. Press or
the screen and press
expected completion time on the timer dis-
play.
4. Select the cooking end time by pressing
or . Next, a double beep is heard and the
current time is displayed on the screen.
5. Select a cooking function and temperature.
The oven will remain disconnected with
symbols and
programmed.
Cooking with MAESTRO PIZZA
To use your MAESTRO PIZZA , first preheat the
oven to the ideal cooking conditions (340 ºC).
To do so:
1. Place the oven grid on the telescopic rails
fitted inside your oven.
2. Next, place the pizza stone on the oven
grid.
3. Remove the enameled tray supplied with
the oven and close the door.
138 User Guide
. The time 00:00 is
until symbol flashes on
. You will see the
lit up. The oven is now
6. When it is time to start cooking, the oven
will turn on and will operate for the pro-
grammed cooking time.
or
7. While cooking, the remaining cooking time
is displayed and symbol
8. When the set cooking time has ended, the
oven will turn off, a buzzer will sound, and
symbol
9. Press any sensor to stop the alarm and to
turn off symbol
again.
10. Set the controls to
You can change the remaining cooking time at
any time by pressing
starts to flash quickly. Now press
the time.
WARNING
Remember that it is very important during
the preheating to ensure that the pizza stone
has been placed inside the oven. This is to
guarantee that the pizza stone reaches the
correct temperature and the optimum cook-
ing results are obtained.
4. Turn the cooking control dial to MAESTRO
PIZZA
5. The value 340º is displayed on the clock
screen.
6. When the OK sensor on the glass of the
front control panel is pressed, a buzzer
flashes slowly.
will flash quickly.
. The oven will switch on
to turn off the oven.
or until symbol
.
to change