All manuals and user guides at all-guides.com
Specifications
Display: 3-3/4–digit LCD (3999 maximum count)
Sampling Rate: 4 per second
Overrange Indication: "OL" appears on the display
Low Battery Indication:
Auto Power Off: 30 minutes after last selector change
Jaw Opening: 53 mm (2.09")
Overvoltage Category: Category II, 1000 Volts; Category III, 600 Volts
Operating Conditions: 0 °C to 45 °C (32 °F to 113 °F) , 0% to 80% relative humidity
Elevation: 2000 m (6500') maximum
Storage Conditions: –20 °C to 60 °C (–4 °F to 140 °F), 0% to 80% relative humidity.
Remove battery.
Pollution Degree: 2
Battery: 9-Volt battery (NEDA 1604, JIS 006P or IEC 6LF22)
Battery Replacement
Before opening the case, remove the test leads or jaw from the circuit and shut off the unit.
Failure to observe this warning can result in severe injury or death.
1.
Disconnect the unit from the circuit. Turn the unit OFF.
2.
Remove the screws from the back cover.
3.
Remove the back cover.
4.
Replace the battery (observe polarity).
5.
Replace the cover and screws.
CM-1000
11